Comments

Decorations on porcelain: In & Out table service

Decorations on porcelain: In & Out table service

Equipment

90 ° alcohol Grease pencil Fine blue adhesive tape Fan brush Cotton swab Gold colored foam (44)

Production

Presentation plate



5'

Clean your plate with alcohol. Trace the notch on the porcelain with a grease pencil. Place the adhesive tape inside the notch. Check that it is installed straight.

15'

With a fan brush, paint the marli on the gold presentation plate, stopping at the blue ribbon. Polish and clean the edges. A few moments later, repaint the same surface with the same color to strengthen the shade, polish again with the same foam.

5'

Clean the edges and let dry 24 hours before cooking.

Dessert plate



5'

Dust and clean the dessert plate. Indicate with a grease pencil the location of the adhesive tape, stick it.

15'

Paint the inside of the plate and the notch in gold with a fan brush. Immerse yourself immediately to prevent the color from freezing. Then reinforce the shade again with a second pass of color. Putoisez.

5'

Clean the inside of the edge of the plate with a cotton swab soaked in water. Let dry twenty-four hours.

Trick

Check that the wide side of the notch on the dessert plate is equal to the narrowest side of the notch on the presentation plate.

Advice

Work away from the sun or a heat source, you will avoid drying your color too quickly.



20 decorations on Porcelain by Flammarion, 2003